High Performance, Simplified
A well-designed Air/Air intercooler system represents the most cost efficient and reliable method of reducing intake charge temperatures in turbocharger and supercharger applications. With no moving parts the Air/Air system provides essentially maintenance free reliability, just this side of bulletproof. Couple this with Bell Intercoolers engineering and design expertise and you have a proven method of harnessing the potential of your turbocharged or supercharged engine.
Extreme Performance Solutions
Whether you are faced with the challenges of space limitations, a lack of access to cooling air flow or you are looking for extreme intercooler efficiencies, the Liquid/Air intercooler system can offer an attractive alternative to Air/Air intercooler systems. The Liquid/Air system works by transferring the charge air heat (from turbocharger or supercharger) to a liquid coolant, this coolant is then pumped to a remotely located heat exchanger where ambient cooling air removes the heat. The obvious advantage with this system is that you can optimally position your heat exchanger in the cooling air stream, regardless of the location of the engine or associated space limitations.
To view our full selection of Air/Air and Liquid/Air intercooler cores and some of the more common Air/Air and Liquid/Air intercooler assembly options available to you just click on the buttons below. If you have any questions you can also click on the Help button at the bottom of this page or feel free to call or email us at your convenience. We look forward to helping you design your next intercooler project.
Use our online inventory system (below) to compare air flow requirements and find the core that best meets the needs of your application. Cores are separated into categories based upon available core thickness (Dimension A in the Air/Air and Liquid/Air diagrams on the right). In each of thicknesses you will find a variety of core dimensions (height and tube length), with listings for air flow of each core, shown in cubic feet per minute (CFM, based on 1 psig pressure loss across the intercooler core and a charge-air pressure of 10 psig) and core weight.
Please note Air to Air and Liquid to Air intercooler cores may not be the same type of construction, bar and plate or
extruded, and there may be dimensions that not available in both types. Also, if you should require a core size that is
not listed please contact us for possible special order options.
Items listed in black are in stock and ready to ship. Items listed in red are currently out of stock and will take more than
one day to ship. If it is out of stock, please give us a call and we will let you know when it will be available.
If you have any questions concerning the selection these components or questions about other options for your
application please consult our Help page or contact Technical Support and we will, at no cost, answer your intercooler
design questions.
Completing Your Order
Once you have selected the core meeting your requirements just click on the Order button (above) to proceed. If you
found the core(s) you required please have this information available before proceeding. If you need assistance
selecting the core for your application please contact Technical Support and we will be glad to assist you.
Consult the Experts
Have questions about air flow requirements or intercooler tank design options for your application? Please contact
Technical Support and let our engineering team assist you with expert advice and information, all provided at no cost
to you. Our philosophy is to provide you with the best parts and best information to ensure you have the best intercooler
for your application.