|
| |
|
Bell
Intercoolers offers a large selection of high quality,
high performance, pressure tested intercooler cores in
sizes to meet all of your turbo and supercharger performance
requirements. Bell Intercoolers uses bar and plate type
cores in Air to Air applications for the highest efficiencies
and performance. If you order before 1:00 central time,
and the core size is in stock, we will ship it for next
day delivery. And with over 2000 cores in stock, we probably
have it on hand and ready to go. Do we have what you're
looking for? Just take a look.
Selecting Your Intercooler Assembly
When ordering an intercooler assembly you will need to
A) select your intercooler core and B) select the tank
designs. Use our online core inventory system (below)
to compare dimensions and air flow requirements to find
the correct core for your application. Use our Tank Selection
system (below) to identify the correct tank configurations
for your intercooler assembly. Additional information
on using our online system is available at the bottom
of this page.
If you have any questions concerning the selection of
either of these components or questions about other options
for your application please consult our Help page or contact
Technical Support
and we will, at no cost, answer your intercooler design
questions.
|
|
|
| |
 |
| |
|
 |
|
|
|
|
|
| |
 |
 |
 |
| |
Core
Selection
Use our online inventory system to compare air flow requirements
and find the core that best meets the needs of your application.
Cores are separated into six categories based upon available
core thickness (Dimension A in the diagram on the right).
In each of the six thicknesses you will find a variety
of core dimensions, with listings for air flow of each
core, shown in cubic feet per minute (CFM, based on 1
psig pressure loss across the intercooler core and a charge-air
pressure of 10 psig) and core weight.
Please note Air to Air and Liquid to Air intercooler cores
may not be the same type of construction, bar and plate
or extruded, and there may be dimensions that not available
in both types. Also, if you should require a core size
that is not listed please contact us for possible special
order options.
Items listed in black are in stock and ready to ship.
Items listed in red are currently out of stock and will
take more than one day to ship. If it is out of stock,
please give us a call and we will let you know when it
will be available.
Tank Selection
In the Tank Selection section you find numerous examples
of possible tank configurations. These represent possible
placements for inlet and outlet tubes on the assembly
end tanks. Please note, these examples only represent
the most popular inlet/outlet placement options and do
not cover all possible configurations. Bell Intercoolers
can design and produce an assembly utilizing whatever
inlet/outlet and tank design you may require for your
application. If you have any questions about the best
design for your assembly please contact Technical
Support and we will be glad to help you design the
best intercooler system possible for your specific requirements.
Consult the Experts
Have questions about air flow requirements or tank design
options for your application? Please contact Technical
Support and let our engineering team assist you with
expert advice and information. Our philosophy is to provide
you with the best parts and best information to ensure
you have the best intercooler for your application. |
|
|
| |
 |
| |
 |
| |
|
|
|
|
|
