|
| |
|
Building
your own intercooler assembly? Need
a high quality Air to Air (Air/Air) intercooler core?
Need it tomorrow? No problem. Just check our core inventory
online, tell us what you need and tell us when you need
it.
Bell Intercoolers offers a large selection of high quality,
high performance, pressure tested intercooler cores in
sizes to meet all of your turbo and supercharger performance
requirements. Bell Intercoolers uses bar and plate type
cores in Air to Air applications for the highest efficiencies
and performance. Order before 1:00 central time and, if
in stock, we will ship it that day. With over 3000 cores
in stock, we probably have what you need on hand and ready
to ship. Do we have what you're looking for? Just take
a look.
Selecting Your Intercooler Core
Use our online intercooler core inventory system (below)
to compare dimensions and air flow requirements to find
the correct Air to Air intercooler core for your application.
Additional information on using our online system is available
below.
Items listed in black are in stock and ready to ship.
Items listed in red are currently out of stock and will
take more than one day to ship. If it is out of stock
please give us a call and we will let you know when it
will be available.
If you should have any questions concerning the selection
of either of these components or questions about other
options for your application please consult our Help page
or contact Technical Support
and we will, at no cost, answer your intercooler design
questions.
|
|
|
| |
 |
| |
|
 |
|
|
|
|
|
| |
 |
| |
Core
Selection
Use our online inventory system to compare air flow requirements
and find the core that best meets the needs of your application.
Cores are separated into six categories based upon available
core thickness (Dimension A in the diagram on the right).
In each of the six thicknesses you will find a variety
of core dimensions, with listings for air flow of each
core, shown in cubic feet per minute (CFM, based on 1
psig pressure loss across the intercooler core and a charge-air
pressure of 10 psig) and core weight.
Please note Air to Air and Liquid to Air intercooler cores
may not be the same type of construction, bar and plate
or extruded, and there may be dimensions that not available
in both types. Also, if you should require a core size
that is not listed please contact us for possible special
order options.
Items listed in black are in stock and ready to ship.
Items listed in red are currently out of stock and will
take more than one day to ship. If it is out of stock,
please give us a call and we will let you know when it
will be available.
Completing Your Order
Once
you have selected the core meeting your requirements just
click on the Complete Core Order button (above) to proceed.
If you found the core(s) you required please have this
information available before proceeding. If you need assistance
selecting the core for your application please contact
Technical Support
and we will be glad to assist you.
Consult the Experts
Have questions about air flow requirements or intercooler
tank design options for your application? Please contact
Technical Support
and let our engineering team assist you with expert advice
and information, all provided at no cost to you. Our philosophy
is to provide you with the best parts and best information
to ensure you have the best intercooler for your application. |
|
|
| |
 |
| |
 |
| |
|
|
|
|
|
